Nitro DCM-01 Mobile Diesel Particulate Filter Washing Machine
With the Nitro DCM-01 Mobile Diesel Particulate Filter Washing Machine, the DPF in Euro 5 and Euro 6 vehicles can be easily washed , without the need to remove the DPF.
Thanks to the Nitro DCM-01, the soot and dirt existed in the Diesel Particulate Filter located at the exhaust outlets of the vehicles can be easily washed , via the oxygen and differential pressure sensors in the vehicles.
With special hydrogen-based washing liquid, water and regeneration, we can clean the dpf on the vehicle within half an hour and we dont need to disassemble the DPFs.
NM-DCM-01 Mobile Diesel Particulate Filter Washing Machine easily clean wastes like soot and oil accumulated in the DPF and Catalytic Converter, with the special hydrogen-based washing fluid it includes, and release these wastes out via the exhaust system with the help of water.
This washing operation never harms the DPF and Catalytic converter and the machine is quite environmentally friendly.
What are the advantages of NM-DCM-01 Mobile Diesel Particulate Filter Washing Machine compared to other machines?
- You can wash the DPF on the vehicle: DPF washing will be quite easy as we will do it without the need to disassemble the DPF. If the washing operation is not successful, we should remove the DPF from the vehicle and clean it outside of the vehicle.
- You save time: You will save a lot of time compared to other machines as you will not need to remove the Diesel Particulate Filter from the vehicle.
- The machine is very successful in terms of price and performance: NM-DCM-01 Mobile Diesel Particulate washing Machine is cheaper than other machines.
- It ensures convenience in your garage: With the Mobile Particulate Washing Machine, you can handle the vehicles coming to your garage in your own garage without sending them outside.
User Guide:
- Before starting the washing operaiton, you have to be sure that the engine is cold.
- You should sse protective equipment like gloves and glasses during the operation.
- You need to connect the connectors to the sensor places.
- While the engine is idling, you should press the Hydrogen button, after you did this, the vehicle DPF washing liquid will be given automatically.
- After the washing operation starts, the operations will finish in 30 minutes automatically, after the operation is finished, the engine should be left idling for 3 minutes.
- Then, water will be given. During this operation, the vehicle must be throttled to operate at 2500 rpm.
- After the washing operation is done, you need to set up the sensors and do DPF regeneration and DPF reset operations with the help of a diagnostic tool. If we dont do that, the DPF fault lamp on the dashboard will not go out.
